![]() ![]() There have been complaints documented over at about severe throttling by the Samsung X5 tbolt3 drive under heavy loads.Īgain, much depends on what you'll be using the drive for.įor "general external storage", I'd be fine with a 2.5" drive or USB3.1 gen2. The fastest speeds are from thunderbolt3 enclosures with nvme blade SSDs.īut they are expensive and again - due to the higher speeds, they can get hotter than the same drives used in USB3.1 gen2 enclosures. I sense that this is part of the nvme control technology that will throttle back a drive under heavy write loads and high heat, with the objective of reducing write errors (due to heat). These will give you reads in the 960MBps range, but I've noticed that it will "throttle back" under heavy loads and high heat. I used an Orico enclosure and a Crucial nvme blade. ![]() I have one of these I put together myself. This will become noticeable under "heavy write" situtations. The type-c interface allows for fast data transfer. ![]() ![]() The next "step up" would be to get a USB3.1 gen2 enclosure and then put an nvme blade drive into it.īut be aware that nvme drives "run hotter" than do 2.5" SATA drives. This slim SSD enclosure is made from durable aluminum, which acts as a protective shell and a heat sink. and you should see read speeds in the 420-430MBps range over USB3a. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |